Repair your computer concise guide


Has your desktop become useless? Are you going to call the engineer? Wait. This post might help you repair your computer.

Problems are often segmented in this way:

  • If computer is not able to power up, problem is with the power supply (or as engineers might say, SMPS).
  • If computer powers up but is not reaching the boot screen load-up, problem is with either the hard disk or motherboard or with loose connections.
  • If boot screen load-up is observed by the user, but is not able to load the operating system (Windows), problem is with the operating system files or the “explorer.exe” or “shell32.dll”.

 

Case 1

You will need to buy an SMPS. So, how to set up this box in your CPU? Let’s see in this video. Credits to Vysakh Kodavana.

https://www.youtube.com/watch?v=z5o5cxJOVaY

 

Case 2

I am going to relate different BIOS chipsets to their respective beep codes.

 

AMI BIOS

Beep Code Descriptions
1 short DRAM refresh failure
2 short Parity circuit failure
3 short Base 64K RAM failure
4 short System timer failure
5 short Process failure
6 short Keyboard controller Gate A20 error
7 short Virtual mode exception error
8 short Display memory Read/Write test failure
9 short ROM BIOS checksum failure
10 short CMOS shutdown Read/Write error
11 short Cache Memory error
1 long, 3 short Conventional/Extended memory failure
1 long, 8 short Display/Retrace test failed

 

AWARD BIOS

Beep Code Description
1 long, 2 short Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information
Any other beep(s) RAM problem.

Note: If any other correctable hardware issues is found the BIOS displays a message.

 

IBM BIOS

Beep Code Description
No Beeps No Power, Loose Card, or Short.
1 Short Beep Normal POST, computer is ok.
2 Short Beep POST error, review screen for error code.
Continuous Beep No Power, Loose Card, or Short.
Repeating Short Beep No Power, Loose Card, or Short.
One Long and one Short Beep Motherboard issue.
One Long and Two Short Beeps Video (Mono/CGA Display Circuitry) issue.
One Long and Three Short Beeps. Video (EGA) Display Circuitry.
Three Long Beeps Keyboard or Keyboard card error.
One Beep, Blank or Incorrect Display Video Display Circuitry.

 

MACINTOSH

Tones Error
Error Tone. (two sets of different tones) Problem with logic board or SCSI bus.
Startup tone, drive spins, no video Problem with video controller.
Powers on, no tone. Logic board problem.
High Tone, four higher tones. Problem with SIMM.

 

PHOENIX BIOS 4.X or Q3.07

Beep Code Description and what to check
1-1-1-3 Verify Real Mode.
1-1-2-1 Get CPU Type.
1-1-2-3 Initialize system hardware.
1-1-3-1 Initialize chipset registers with initial POST values.
1-1-3-2 Set in POST flag.
1-1-3-3 Initialize CPU registers.
1-1-4-1 Initialize cache to initial POST values.
1-1-4-3 Initialize I/O.
1-2-1-1 Initialize Power Management.
1-2-1-2 Load alternate registers with initial POST values.
1-2-1-3 Jump to UserPatch0.
1-2-2-1 Initialize keyboard controller.
1-2-2-3 BIOS ROM checksum.
1-2-3-1 8254 timer initialization.
1-2-3-3 8237 DMA controller initialization.
1-2-4-1 Reset Programmable Interrupt Controller.
1-3-1-1 Test DRAM refresh.
1-3-1-3 Test 8742 Keyboard Controller.
1-3-2-1 Set ES segment to register to 4 GB.
1-3-3-1 28 Autosize DRAM.
1-3-3-3 Clear 512K base RAM.
1-3-4-1 Test 512 base address lines.
1-3-4-3 Test 512K base memory.
1-4-1-3 Test CPU bus-clock frequency.
1-4-2-4 Reinitialize the chipset.
1-4-3-1 Shadow system BIOS ROM.
1-4-3-2 Reinitialize the cache.
1-4-3-3 Autosize cache.
1-4-4-1 Configure advanced chipset registers.
1-4-4-2 Load alternate registers with CMOS values.
2-1-1-1 Set Initial CPU speed.
2-1-1-3 Initialize interrupt vectors.
2-1-2-1 Initialize BIOS interrupts.
2-1-2-3 Check ROM copyright notice.
2-1-2-4 Initialize manager for PCI Options ROMs.
2-1-3-1 Check video configuration against CMOS.
2-1-3-2 Initialize PCI bus and devices.
2-1-3-3 Initialize all video adapters in system.
2-1-4-1 Shadow video BIOS ROM.
2-1-4-3 Display copyright notice.
2-2-1-1 Display CPU Type and speed.
2-2-1-3 Test keyboard.
2-2-2-1 Set key click if enabled.
2-2-2-3 56 Enable keyboard.
2-2-3-1 Test for unexpected interrupts.
2-2-3-3 Display prompt Press F2 to enter SETUP.
2-2-4-1 Test RAM between 512 and 640k.
2-3-1-1 Test expanded memory.
2-3-1-3 Test extended memory address lines.
2-3-2-1 Jump to UserPatch1.
2-3-2-3 Configure advanced cache registers.
2-3-3-1 Enable external and CPU caches.
2-3-3-3 Display external cache size.
2-3-4-1 Display shadow message.
2-3-4-3 Display non-disposable segments.
2-4-1-1 Display error messages.
2-4-1-3 Check for configuration errors.
2-4-2-1 Test real-time clock.
2-4-2-3 Check for keyboard errors
2-4-4-1 Set up hardware interrupts vectors.
2-4-4-3 Test coprocessor if present.
3-1-1-1 Disable onboard I/O ports.
3-1-1-3 Detect and install external RS232 ports.
3-1-2-1 Detect and install external parallel ports.
3-1-2-3 Re-initialize onboard I/O ports.
3-1-3-1 Initialize BIOS Data Area.
3-1-3-3 Initialize Extended BIOS Data Area.
3-1-4-1 Initialize floppy controller.
3-2-1-1 Initialize hard disk controller.
3-2-1-2 Initialize local bus hard disk controller.
3-2-1-3 Jump to UserPatch2.
3-2-2-1 Disable A20 address line.
3-2-2-3 Clear huge ES segment register.
3-2-3-1 Search for option ROMs.
3-2-3-3 Shadow option ROMs.
3-2-4-1 Set up Power Management.
3-2-4-3 Enable hardware interrupts.
3-3-1-1 Set time of day.
3-3-1-3 Check key lock.
3-3-3-1 Erase F2 prompt.
3-3-3-3 Scan for F2 key stroke.
3-3-4-1 Enter SETUP.
3-3-4-3 Clear in POST flag.
3-4-1-1 Check for errors
3-4-1-3 POST done – prepare to boot operating system.
3-4-2-1 One beep.
3-4-2-3 Check password (optional).
3-4-3-1 Clear global descriptor table.
3-4-4-1 Clear parity checkers.
3-4-4-3 Clear screen (optional).
3-4-4-4 Check virus and backup reminders.
4-1-1-1 Try to boot with INT 19.
4-2-1-1 Interrupt handler error.
4-2-1-3 Unknown interrupt error.
4-2-2-1 Pending interrupt error.
4-2-2-3 Initialize option ROM error.
4-2-3-1 Shutdown error.
4-2-3-3 Extended Block Move.
4-2-4-1 Shutdown 10 error.
4-3-1-3 Initialize the chipset.
4-3-1-4 Initialize refresh counter.
4-3-2-1 Check for Forced Flash.
4-3-2-2 Check HW status of ROM.
4-3-2-3 BIOS ROM is OK.
4-3-2-4 Do a complete RAM test.
4-3-3-1 Do OEM initialization.
4-3-3-2 Initialize interrupt controller.
4-3-3-3 Read in bootstrap code.
4-3-3-4 Initialize all vectors.
4-3-4-1 Boot the Flash program.
4-3-4-2 Initialize the boot device.
4-3-4-3 Boot code was read OK.

NOTE: For different AMI, AWARD and IBM chipsets, these beep codes can mean different things. Refer to their respective documentations.

 

Case 3

Use “System Restore” utility by Windows to recover from this damage. Or reload a new Windows from scratch. How to do it? Let’s see in this video. Credits to CorzaVids.

 

Use this guide to save bucks for a small party on, for example, success of repairing your computer.

 

Advertisements

Need help on any technology matters? Email me at harshch@outlook.com

Tagged with: , , , , ,
Posted in Guides

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

harsh0chaudhary

harsh0chaudhary

Need help on any technology matters? Email me at harshch@outlook.com

View Full Profile →

Enter your email address to follow HC Tech Byte and receive email notifications.

Join 152 other followers

Old Tech Bytes
Tags
5x 6p 7-zip 7-zip 9.34 alpha 7Z 7zip 7zip 9.34 7zip 16.02 7zip alpha adobe Advanced System Care Android android 4.5 android 5 Android M android nokia Android Pay anti piracy antivirus Antiy AVL Any Video Converter for Mac app settings arch arch linux asus AV avast AVG Avira AVL B1 Free Archiver backup benchmark benchmark test BIOS Bitdefender BitDefender TrafficLight Bitdefender USB Immunizer BLAKE2 BlueTooth 4.2 bluray boost Boost by Reason bootable disc bootloader BootRacer brasero browser wars burnaware call feature card slot CCEnhancer CCleaner cdburnerxp cd burning centos chrome chrome 45 chromeos clonezilla CMOS comodo comodo firewall Comodo Internet Security compression tool coolpad CPU cubic explorer cubicexplorer daemon damn small linux data recovery data recovery software data recovery tool data usage DBAN dd backup debian defraggler directory opus disc burning DiskFresh document converter dopus double commander download accelerator plus download manager downthemall Doze drivers dvd burning easeus Emsisoft Online Armor eraser eRightSoft fedora FF Multi Converter file archiver file manager file managers fingerprint firefox firefox 40 firefox call FixWin flashget flashgot foxit foxspeed foxspeed ultimate framaroot FreeARC free commander freecommander freecommander xe free commander xe free download manager freemake Free MIDI to MP3 Converter gigaget GigaTweaker Glary Utilities gmail hera GnomeRAR Google google maps google now GPU honor 5x HTC huawei idm IE imgburn install windows internet download manager Internet Explorer iolo iphone iwork java k3b kali linux Kaspersky Keka kingsoft kingsoft office kmplayer km player le1s lenovo less internet data usage lg g5 libreoffice light linkextend Linux linux mint Live CD load Windows lollipop Mac malwarebytes memory card microsoft Microsoft doomsday microsoft office Microsoft self-destruct MIDI MIUI MIUI battery saver mobile security money moto mozilla ms office multi commander multicommander mxone mx one NAND lock NanoZip nero nero linux netscape Netscape Navigator nexus nightly ninja pendisk ninja pen disk No-frills CPU nokia nokia android Nokia X2 NoScript office office 365 office suite oneplus openoffice opensuse opera opera next p7zip Panda parted magic PC Decrapifier PeaZip photoscape picasa PIPA Piracy pirates PlayStore plugins Process Piglet Process Tamer protection puppy linux Q-Dir qbittorrent r-studio RAM RAR RAR5 RARMachine recuva red hat redhat redo abckup Reduce data usage Repair rescatux rhel rle ROM ROM Toolbox root rooting rstudio s7 s7 edge samsung SAR Screen size SD card SD card slot security sensors SetCPU slackware Slim Cleaner SlimCleaner smartphone SMPS Sony SOPA speedcommander speed commander speedfan speedup SqueezeChart stamina mode steamos stellar phoenix data recovery StuffIt stylus SUPER SuperOneClick superuser suse System Mechanic systemrescuecd system rescue cd System Restore tails TAR TCPOptimizer test testdisk ToolWiz torrent total video converter trinity rescue kit TuneUp Utilities TweakMe! ubcd ubuntu ultimate boot cd ultraiso universal extractor Unix unlimited storage Unlocker unlocking unreal commander Unrevoked USB type C utorrent VirusTotal vlc VPN web browser Web Of Trust WiFi Windows Windows 7 Windows 8 Windows 8.1 Windows 10 Windows 10 Technical preview Windows XP Windows XP shutdown winpatrol winrar WinRAR 5.10 winrar 5.11 winrar 5.31 Wondershare Video Converter WOT wps wps office XDM xiaomi xperia z5 xtreme download manager yu yuphoria zenfone 2 ZIP ZIPX zonealarm zorin os
%d bloggers like this: